Trade Associations

ASHRAE_logo_rgb_transparent3.png
NAFA.jpg
IFMA.jpg
BNJ Logo on grey.jpg

BLEJWAS ASSOCIATES, INC.
221-A Evans Way • Branchburg, NJ 08876
Tel: (908) 253-8822 • Fax: (908) 253-8833
Send us an email

© 1981-2019 Blejwas Associates, Inc. All Rights Reserved. 

Pleats

Puro-g13een®

  • MERV 13

  • Moisture resistant beverage board frame

  • Damage resistant

  • May qualify as a sustainable component for LEED/Green Building Initiative 

  • 1", 2" and 4" depths available

Service Parts

Key Pleat®

  • MERV 8 standard and high capacity

  • 100% synthetic media

  • Self-supported

  • Damage resistant

  • No metal 

  • Fully incinerable

Defiant® Mark80-D™

  • Available in 1", 2" or 4" depths and several standard face sizes

  • 100% hydrophobic synthetic media 

  • Mechanical MERV 8

  • 95% average arrestance 

  • Effective as a stand-alone filter or pre-filter

Hi-E® 40

  • Available in 1", 2", 4" or 6" depths and several standard face sizes

  • 100% hydrophobic synthetic media

  • Mechanical MERV 8

  • 95% average arrestance 

  • Effective as a stand-alone filter or pre-filter

Hi-E® 40 I

  • Perimeter frame is constructed of UL approved non-flammable board

  • Media is bonded upstream and downstream to diagonal support elements

  • 1/8" thick media

  • Media is high density

  • Ultra-fine fiberglass media reinforced by a woven fiberglass mesh

  • MERV 8 

  • 90-93% average arrestance

Hi-E® 40 H

  • MERV 8

  • Specially constructed for use in systems involving elevated operating temperatures

  • Perimeter frame is constructed of 24 gauge aluminized steel

  • Pleated element is supported downstream by a 24 gauge expanded aluminized steel face guard

  • Filter media is ¼" thick, high-density ultra-fine fiberglass reinforced by a woven fiberglass mesh 

  • Constructed to operate at 400 degrees F continuously and may be subjected to temperatures up to 450 degrees F for short durations of not more than 10 minutes

Mono Pleat

  • One-piece wrap around chipboard frame

  • Filter element is mechanically bonded to the frame by a thermal plastic sealant activated by applied heat and pressure

  • Economical, high capacity medium efficiency filter 

  • Designed for applications where 1" disposables are effective

PAF 11™

  • MERV 11

  • Self-supported

  • Extended surface

  • Manufactured for system applications requiring high efficiency, non-shedding filtration media 

  • Effective in single filter applications or as improved pre-filter substitutes for disposables, permanent metal filters or media pad/frame filters

Synergy®

  • Fit in the same space as standard 1" return grille filters

  • No modification or retrofitting of your return grille is required

  • Deep pleat design provides eight times more filter surface area

  • Extending service life by 6 to 12 times over standard 1" filters 

  • Extended surface media also provides significantly higher efficiency to capture dust and lint, pollen, mold, spores, fungi, bacteria and pet dander to name a few

P25: Honeywell F25 Replacement Cartridge

  • Equal to or better than original equipment performance

  • Delivers up to 98% efficiency on 5 micron and larger particles

  • Reduces dust accumulation on household furniture

  • Unique face board design lowers initial static pressure 

  • Sizes available = 16" x 25" x 5", 20" x 25" x 5", and 20" x 20" x 5"

P5 / Purolator 2000

  • Replacement filter for Trion Air Bear®

  • Reduces dust accumulation, allergy causing irritants

  • Expanded Metal Support Grid

  • Moisture resistant beverage board frame 

  • Size available = 20" x 25" x 5"

P1200

  • Replacement filter for Trion Air Bear 1200TM®

  • Effectively reduces pollen, dust, mold spores, pet dander

  • Lofted, non-woven cotton/synthetic media

  • Increases filtration efficiency 

  • Size available = 16" x 25" x 3"

For more information about our pleats, please call: 908-253-8822, or fill out a contact form, and one of our associates will respond to you in a timely manner.